Table of Contents
Advertisement
C
H A P T E R
Load or Save Building Blocks
A BB is a building block used to build a device configuration using Vantage CNM.
A device BB is a combination of configuration BBs, which vary by model. A device can have
only one Device BB. You can select any device and save its configuration as a BB ready to be
applied to another device (of the same model type). This allows rapid configuration of new
devices as you can essentially copy one device's configuration to another.
These menus only appear if you select a ZyNOS-based or a prestige device.
3.1 Load or Save BB
Use this menu item to load building blocks to the selected device or to create building blocks
from the current configuration of the selected device. This menu item appears if a device is
selected. To open this menu item, select the device, click Device Operation in the menu bar
and then click Device Configuration > Load or Save BB in the navigation panel.
Vantage CNM User's Guide
3
(BB)
57
Advertisement
Table of Contents
Troubleshooting
