Vantage CNM 2.0 User's Guide
Figure 37 Configuration > LAN > IP – ZyWALL
The following table describes the fields in this screen
Table 17 Configuration > LAN > IP – ZyWALL
LABEL
DHCP Mode
IP Pool Starting
Address
Pool Size
73
DESCRIPTION
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (computers) to obtain TCP/IP configuration at startup from a
server. When configured as a server, the ZyXEL device provides TCP/IP
configuration for the clients. If not, DHCP service is disabled and you must have
another DHCP server on your LAN, or else the computer must be manually
configured. When set as a server, fill in the rest of the DHCP setup fields.
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count of the IP address pool.
Chapter 5 Configuration > LAN