Configuring The Wan Connection With A Static Ip Address; Figure 44 Tutorial Example: Wan Connection With A Static Public Ip Address - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Chapter 4 Tutorial

4.2.2 Configuring the WAN Connection with a Static IP Address

The following table shows the information your ISP gave you for Internet connection.
Encapsulation
Public IP Addresses
Gateway IP Address
Subnet Mask
User Name
Password
DNS Server
Follow the steps below to configure your ZyWALL for Internet access using PPPoE in this
example.

Figure 44 Tutorial Example: WAN Connection with a Static Public IP Address

1 Click NETWORK > WAN > WAN 1.
2 Select PPPoE (PPP over Ethernet) from the Encapsulation drop-down list box.
3 In the ISP Parameters for Internet Access section, enter the information (such as the
user name and password) provided by your ISP. If your ISP didn't give you the service
name, leave the field blank.
4 In the WAN IP Address Assignment section, select Use Fixed IP Address and enter
the first fixed public IP address (1.2.3.4 in this example).
5 Click Apply.
110
PPPoE
1.2.3.4
1.2.3.5
1.2.3.6
1.2.3.7
1.2.3.89
255.255.255.0
exampleuser
abcd1234
1.2.1.1
1.2.1.2
ZyWALL 2WG User's Guide