User Security Commands - Nortel DMS-10 Series Quick Reference Manual

18 Maintenance Commands
Command Name
VALPARM LOGHDR
VALPARM LOGHDR xxx

User Security Commands

Command Name
MPRI C c x
MPRI E c
PSWD A nnnnnn p
PSWD uC nnnnnn p
PSWD uD
PSWD L
Note: If the value of the PSWD command is changed, the LINIT and
SITDAT WRITE commands must be entered afterwards to initialize
the CP with the new value and to save the new value to disk, respec-
tively. LINIT should not be issued during a polling session.
SETTERM TIMEOUT
SETTERM TIMEOUT x
Note: If the value of the SETTERM TIMEOUT command is
changed, the LINIT and SITDAT WRITE commands must be entered
afterwards to initialize the CP with the new value and to save the new
value to disk, respectively. LINIT should not be issued during a poll-
ing session.
297-6201-500 BMCA001 and up
Explanation
Displays current status of the log
header; either enabled or disabled.
Enables or disables the display of the
block header as they are written to
disk.
xxx - ON log header display
ENBLED.
OR
xxx - OFF log header display DIS-
ABLED.
Explanation
Change user priority of a selected com-
mand.
Displays the user priority of the
selected command.
c - command to be changed.
x - priority level: 1-3.
Add new user password to system.
Change a currently assigned password
or priority level.
Delete the selected user number pass-
word 0-9.
u - user number.
nnnnnn - 6 character alphanumeric
password.
p - priority: 0-3 (0 - lowest,
3 - highest).
Displays the user passwords and the
associated priority level.
Displays the length of time that no
activity can take place before the BMC
automatically logs off the terminal.
Change automatic terminal timeout
value.
x - minutes: 1-120.
OR
x - 00 to disable timeout.
Standard 02.01 July 1997