Display Operations - The Display Subsystem - HP 8163A Programming Manual

5.1 Display Operations – The DISPlay Subsystem
command: :DISPlay:BRIGhtness
syntax: :DISPlay:BRIGhtness<wsp><value>
description: Controls the brightness for the display.
parameters: An integer value in the range 0 to 100
response: none
example:
disp:brig 75
affects: HP 8163A Lightwave Multimeter
command: :DISPlay:BRIGhtness?
syntax: :DISPlay:BRIGhtness?
description: Requests the brightness for the display.
parameters: none
response: An integer value in the range 0 to 100
disp:brig? → +75<END>
example:
affects: HP 8163A Lightwave Multimeter
command: :DISPlay:CONTrast
syntax: :DISPlay:CONTrast<wsp><value>
description: Controls the contrast for the display.
parameters: An integer value in the range 0 to 100
response: none
example:
disp:cont 50
affects: HP 8163A Lightwave Multimeter
Instrument Setup and Status
Display Operations – The DISPlay Subsystem
The DISPlay subsystem lets you control what you see on the
instrument's display.
137