HP 8163A Programming Manual page 120

command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:[STATe]?
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:[STATe]?
description: Returns the state of a sweep.
parameters: none
response: +0:
+1:
example:
wav:swe?
affects: All Tunable Laser modules
command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:STEP:NEXT
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:STEP:NEXT
description: Performs the next sweep step, if a manual sweep is paused.
parameters: none
response: none
example:
wav:swe:step:next
affects: All Tunable Laser modules
command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:STEP:
PREVious
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:STEP:PREVious
description: Performs one sweep step backwards, if a manual sweep is paused.
parameters: none
response: none
example:
wav:swe:step:prev
affects: All Tunable Laser modules
Introduction to Programming
Signal Generation – The SOURce Subsystem
Sweep is not running
Sweep is running
→
+0<END>
120