HP 8163A Programming Manual page 40

Command
:OPTions?
:TST?
[:SOURce[n]][:CHANnel[n]]
:MODout/?
[:SOURce[n]][:CHANnel[n]:]AM
[:INTernal]:FREQuency/?
:SOURce/?
:STATe/?
[:SOURce[n]][:CHANnel[n]:]POWer
[ LEVel][ IMMediate][
: :
[:LEVel]:RISetime/?
:ATTenuation/?
:STATe/?
:UNIT/?
:WAVelength/?
[:SOURce[n]][:CHANnel[n]:]POWer:ATTenuation
:AUTO/?
:DARK/?
Table 2-1
Specific Commands
Specific Command Summary
Description
Returns the module's options.
The module performs a selftest and returns the
results.
Returns the mode of the modulation output.
Sets or returns the frequency of an internal signal
source.
Sets or returns a source for the modulating system.
Turns Amplitude Modulation of a source on or off
or returns whether Amplitude Modulation is on or
off.
AMPLitude] Sets or returns the laser output power of a source.
: /?
Sets or returns the laser rise time of a source.
Sets or returns the attenuation level for a source.
Sets or returns the state of the source output
signal.
Sets or returns the power units.
Sets or returns the wavelength source of a dual-
wavelength source.
Selects Automatic or Manual Attenuation Mode
for a source or returns the selected mode.
Enables/disables 'dark' position on a source or
returns whether 'dark' position is active for a
source.
Specific Command Summary, continued
40
Page
72
73
100
96
97
99
105
107
101
108
108
110
102
103