HP 8163A Programming Manual page 68

command: :SYSTem:TIME?
syntax: :SYSTem:TIME?
description:
Returns the instrument's internal time.
parameters: none
response: The time in the format hour, minute, second. Hours are counted 0...23 (16-
bit signed integer values).
syst:time? → +20,+15,+30<END>
example:
command: :SYSTem:VERSion?
syntax: :SYSTem:VERSion?
description: Returns the SCPI revision to which the instrument complies.
parameters: none
response: The revision year and number.
syst:vers? → 1995.0<END>
example:
command: :SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
syntax: :SYSTem:COMMunicate:GPIB[:SELF]:ADDRess<wsp>
<HP-IB Address>
description: Sets the HP-IB address.
parameters: The HP-IB Address
response: none
example:
SYST:COMM:GPIB:ADDR 20
command: :SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
syntax: :SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
description: Returns the HP-IB address.
parameters: none
response: The HP-IB Address
example:
SYST:COMM:GPIB:ADDR?
Instrument Setup and Status
Interface/Instrument Behaviour Settings – The SYSTem
Subsystem
68
→
+20<END>