command:
*OPT?
syntax:
*OPT?
description:
The OPTions query *OPT? returns the modules installed in your
instrument.
parameters:
none
response:
Returns the part number of all installed modules, separated by commas.
Slots are listed starting with slot 0, if a large tunable laser source module is
installed in slot 0.
Slots are listed starting with slot 1, if slot 0 is empty or not recognised.
If any slot other than slot 0 is empty or not recognised, two spaces are
inserted instead of the module's part number. See the example below, where
slots 1 and 4 are empty.
*OPT? → 81682A ,
example:
Instrument Setup and Status
IEEE-Common Commands
,
51
81533B,
81532A,
<END>