HP 8163A Programming Manual page 130

command: :TRIGger:CONFiguration:EXTended?
syntax: :TRIGger:CONFiguration:EXTended?
description: Returns the extended hardware trigger configuration.
parameters: none
response: Node A Input Configuration:
Node B Input Configuration:
Output Matrix Configuration:
trig:conf:ext? → +0,+0,+0<END>
example:
Introduction to Programming
Triggering - The TRIGger Subsystem
130
A 32-bit unsigned integer, see below.
A 32-bit unsigned integer, see below.
A 32-bit unsigned integer, see below.