HP 8163A Programming Manual page 77

command: :SENSe[n]:[CHANnel[n]]:CORRection[:LOSS][:INPut]
[:MAGNitude]?
syntax: :SENSe[n]:[CHANnel[n]]:CORRection[:LOSS][:INPUT][:MAGNitude]?
description: Returns the calibration factor for a module.
parameters: none
response: The calibration factor as a float value. Units are in dB, although no units are
returned in the response message.
example:
sens1:corr?
affects: All power meter modules
command: :SENSe[n]:[CHANnel[n]]:CORRection:COLLect:ZERO
syntax: :SENSe[n]:[CHANnel[n]]:CORRection:COLLect:ZERO
description: Zeros the electrical offsets for a module.
parameters: none
response: none
example:
sens1:corr:coll:zero
affects: All power meter modules
command:
:SENSe[n]:[CHANnel[n]]:CORRection:COLLect:ZERO?
syntax: :SENSe[n]:[CHANnel[n]]:CORREction:COLLect:ZERO?
description: Returns the status of the most recent zero command.
parameters: none
response: 0:
any other number:
sens1:corr:coll:zero? → 0<END>
example:
affects: All power meter modules
Introduction to Programming
Measurement Functions – The SENSe Subsystem
→
+1.00000000E+000<END>
zero succeeded without errors.
remote zeroing failed (the number is the error code
returned from the operation).
77