HP 8163A Programming Manual page 113

command: [:SOURce[n]][:CHANnel[n]]:WAVelength:REFerence?
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:REFerence?
description: Returns the reference wavelength (λ
parameters: none
response: The wavelength as a float value in meters.
example:
sour2:wav:ref?
affects: All Tunable Laser modules
command: [:SOURce[n]][:CHANnel[n]]:WAVelength:REFerence:DISPlay
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:REFerence:DISPlay
Sets the reference wavelength to the value of the output wavelength (λ →
description:
λ
).
0
parameters: none
response: none
example:
sour2:wav:ref:disp
affects: All Tunable Laser modules
command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:CYCLes
syntax:
[:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:CYCLes
<value>|MIN|MAX|DEF
description: Sets the number of cycles.
parameters: The number of cycles is an integer value.
Also allowed are:
response: none
example:
wav:swe:cycl 3
affects: All Tunable Laser modules
Introduction to Programming
Signal Generation – The SOURce Subsystem
→
+1.5500000E-006<END>
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but
is half the sum of, the minimum programmable
value and the maximum programmable value
113
).
0
<wsp>