HP 8163A Programming Manual page 59

command: :STATus:OPERation:ENABle?
syntax: :STATus:OPERation[:ENABle]?
description: Returns the OSESM for the OSESR
parameters: none
response: The bit value for the operation enable mask as a 16-bit signed integer
value (0 .. +32767)
stat:oper:enab? → +128<END>
example:
command: :STATusn:OPERation:ENABle
syntax: :STATusn:OPERation:ENABle<wsp><value>
description: Sets the bits in the Operation Slot Status Enable Mask (OSSEM) for slot n
that enable the contents of the Operation Slot Status Event Register
(OSSER) for slot n to affect the OSESR.
Setting a bit in this register to 1 enables the corresponding bit in the OSSER
for slot n to affect bit n of the OSESR.
parameters: The bit value for the OSSEM as a 16-bit signed integer value (0 .. +32767)
response: none
example:
stat:oper:enab 128
command: :STATusn:OPERation:ENABle?
syntax: :STATusn:OPERation[:ENABle]?
description: Returns the OSSEM of slot n
parameters: none
response: The bit value for the OSSEM as a 16-bit signed integer value (0 .. +32767)
stat:oper:enab? → +128<END>
example:
Instrument Setup and Status
Status Reporting – The STATus Subsystem
59