HP 8163A Programming Manual page 117

command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:REPeat
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:REPeat<wsp><mode>
description: Sets the repeat mode.
parameters: ONEWay:
TWOWay:
response: none
example:
wav:swe:rep twow
affects: All Tunable Laser modules
command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:REPeat?
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:REPeat?
description: Returns the repeat mode.
parameters: none
response: ONEWay:
TWOWay:
example:
wav:swe:rep?
affects: All Tunable Laser modules
command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:SPEed
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:SPEed<wsp><speed>
[NM/S|UM/S|MM/S|M/S|]
description: Sets the speed for continuous sweeping.
parameters: Speed as a float value in meters per second (m/s).
response: none
example:
wav:swe:spe 10nm/s
affects: All Tunable Laser modules
Introduction to Programming
Signal Generation – The SOURce Subsystem
→
ONEW<END>
117