HP 8163A Programming Manual page 127

command: :TRIGger:CONFiguration
syntax: :TRIGger:CONFiguration<wsp><triggering mode>
description: Sets the hardware trigger configuration with regard to Output and Input Trig-
ger Connectors.
parameters: 0 or DISabled:
1 or DEFault:
2 or PASSthrough:
3 or LOOPback:
response: none
example:
trig:conf dis
Introduction to Programming
Triggering - The TRIGger Subsystem
Trigger connectors are disabled.
The Input Trigger Connector is activated, the
incoming trigger response for each slot
":TRIGger[n][:CHANnel[n]]:INPut" on page 123
determines how each slot responds to an incoming
trigger, all slot events (see
":TRIGger[n][:CHANnel[n]]:OUTPut" on page 125)
can trigger the Output Trigger Connector.
The same as DEFault but a trigger at the Input Trigger
Connector generates a trigger at the Output Trigger
Connector automatically.
The same as DEFault but a trigger at the Output
Trigger Connector generates a trigger at the Input
Trigger Connector automatically.
127