HP 8163A Programming Manual page 91

command: :SENSe[n]:[CHANnel[n]]:POWer:UNIT
syntax: :SENSe[n]:[CHANnel[n]]:POWer:UNIT<wsp>DBM|0|Watt|1
description: Sets the sensor power unit
parameters: An integer value:
or DBM or Watt
response: none
example:
sens1:pow:unit 1
affects: All power meter modules
command: :SENSe[n]:[CHANnel[n]]:POWer:UNIT?
syntax: :SENSe[n]:[CHANnel[n]]:POWer:UNIT?
description: Inquires the current sensor power unit
parameters: none
response: An integer value:
sens1:pow:unit? → +1<END>
example:
affects: All power meter modules
Introduction to Programming
Measurement Functions – The SENSe Subsystem
0: dBm
1: Watt
0: Current power units are dBm.
1: Current power units are Watts.
91