Lenovo Converged HX Series Installation And Service Manual page 135

The following notes describe the types of adapters that the server supports and other information that you
must consider when you install a LAN Mezz adapter:
• To confirm that the server supports the LAN Mezz adapter that you are installing, see
www.lenovo.com/us/en/ serverproven/
• To confirm that the server supports the LAN Mezz adapter that you are installing, see
www.lenovo.com/us/en/ serverproven/
• If you are installing a different LAN Mezz adapter, make sure you also need to replace the standoffs which
come from the package.
Standoff Standoff
(For RJ-45) (For Intel X520)
Figure 54. The standoffs of the LAN Mezz adapters
Read the safety information in "Safety" on page iii and "Installation guidelines" on page 79.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices
and disconnect all external cables.
To replace a LAN Mezz adapter, complete the following steps.
Step 1. Touch the static-protective package that contains the adapter to any unpainted metal surface on
the server; then, remove the adapter from the package.
Step 2. Install the 4 stand offs.
Step 3. Install the LAN Mezz adapter.
Step 4. Tighten the 4 screws.
.
.
Chapter 5
http://
http://
.
Removing and replacing server components
121