Lenovo Converged HX Series Installation And Service Manual page 22

• Basic System Management
The TMM combines service processor functions, video controller, and remote presence and blue-screen
capture features in a single chip. The TMM provides advanced service-processor control, monitoring, and
alerting function. If an environmental condition exceeds a threshold or if a system component fails, the
TMM lights LEDs to help you diagnose the problem, records the error in the TMM event log, and alerts you
to the problem. Optionally, the TMM also provides a virtual presence capability for remote server
management capabilities. The TMM provides remote server management through the following industry-
standard interfaces:
– Intelligent Platform Management Interface (IPMI) version 2.0
– Simple Network Management Protocol (SNMP) version 3.0
– Common Information Model (CIM)
– Web browser
For additional information, see the TMM User Guide at the
• Lenovo ThinkServer Diagnostics (LTD)
The Lenovo ThinkServer Diagnostics enables you to diagnose server problems offline, perform some
diagnostic tests, and collect system information. Examples of the system information include basic
operating-system information, hardware information, SEL, RAID log, and so on. Depending on the model,
your server might come with one of the following diagnostic program editions:
– Lenovo ThinkServer Diagnostics Standalone Edition (LTDS)
For more information about Lenovo ThinkServer Diagnostics, go to
lenovodiagnosticsolutions/downloads
of the Web page. Then, click the desired link for more information.
• Lenovo ToolsCenter Suite CLI
Lenovo ToolsCenter Suite CLI consists of individual application modules that utilize a command-line
interface (CLI) to help you manage servers. With the inventory application module, Lenovo ToolsCenter
Suite CLI enables you to get inventory and system information for ThinkServer servers.
For more information about Lenovo ToolsCenter Suite CLI, go to:
https://support.lenovo.com/solutions/HT116433?LinkTrack=Solr
• Large data-storage capacity and hot-swap capability (6 drive bays per node)
The server supports a maximum of twenty-four 2.5-inch hot-swap Serial Attached SCSI (SAS) or Serial
ATA (SATA) hard disk drives.
• Large system-memory capacity
The server supports up to 32 GB RDIMMs memory module. The memory controller supports error
correcting code (ECC) for up to 4 industry-standard PC4-19200 (DDR4-2400), DDR4 (fourth-generation
double-data-rate).
• Lenovo Partner Pack for Microsoft System Center Configurations management
The Lenovo Partner Pack for Microsoft System Center Configurations Management (SCCM) program
helps you manage the firmware components in your ThinkServer server. The firmware components
include TMM, BIOS, Deployment Manager Application, Windows Driver Package for Deployment
Manager, and Linux Driver Package for Deployment Manager. The program also enables users to send e-
mail alerts to related recipients when certain events are detected. For detailed information about using the
program, refer to the help system of the program.
• Lenovo Partner Pack for Microsoft System Center Operations management
The Lenovo Partner Pack for Microsoft System Center Operations Management program automatically
detects the managed servers of your ThinkServer server and provides detailed system information about
the managed servers. The system information includes component inventory, component status, and
sensor status. The program also enables users to perform management tasks, such as restarting or
8
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide
http://datacentersupport.lenovo.com
. Locate the Lenovo ThinkServer Diagnostics section at the bottom
https://support.lenovo.com/tw/zh/
.