Lenovo Converged HX Series Installation And Service Manual page 186

2. Reseat the heat sink, and re-apply the thermal grease.
3. If the error recurs, contact Lenovo service representative for technical support.
• Diagnostic Code:
01010926
01010927
Full Sensor Name (Sensor Name In SDR):
CPU%_VR_Temp (% = CPU Number)
Sensor Type:
Temperature
Event Severity:
Critical
Description:
Upper Critical - Going High - Asserted
Message:
CPU% VR temperature is too high
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. Reseat the heat sink, and re-apply the thermal grease.
3. If the error recurs, contact Lenovo service representative for technical support.
• Diagnostic Code:
01010726
01010727
Full Sensor Name (Sensor Name In SDR):
CPU%_VR_Temp (% = CPU Number)
Sensor Type:
Temperature
Event Severity:
Warning
Description:
Upper Non-Critical - Going High - Asserted
Message:
CPU% VR temperature is too high
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. Reseat the heat sink, and re-apply the thermal grease.
3. If the error recurs, contact Lenovo service representative for technical support.
• Diagnostic Code:
01010B28
Full Sensor Name (Sensor Name In SDR):
172
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide