Lenovo Converged HX Series Installation And Service Manual page 178

1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. If the error recurs, contact Lenovo service representative for execution of node replacement.
• Diagnostic Code:
02010212
Full Sensor Name (Sensor Name In SDR):
SYS_3.3.V
Sensor Type:
Voltage
Event Severity:
Critical
Description:
Lower Critical - Going Low - Asserted
Message:
3.3V voltage is too low
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. If the error recurs, contact Lenovo service representative for execution of node replacement.
• Diagnostic Code:
02010012
Full Sensor Name (Sensor Name In SDR):
SYS_3.3.V
Sensor Type:
Voltage
Event Severity:
Warning
Description:
Lower Non-Critical - Going Low - Asserted
Message:
3.3V voltage is too low
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. If the error recurs, contact Lenovo service representative for execution of node replacement.
• Diagnostic Code:
02010B12
Full Sensor Name (Sensor Name In SDR):
SYS_3.3.V
Sensor Type:
Voltage
164
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide