Lenovo Converged HX Series Installation And Service Manual page 120

Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
Read the safety information in "Safety" on page iii and "Installation guidelines" on page 79.
To replace or install a hot-swap power supply, complete the following steps.
Step 1. Slide the hot-swap power supply into the bay until the release latch clicks into place.
Important: During normal operation, each power-supply bay must contain either a power supply
or power-supply filler panel for proper cooling.
106
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide