Lenovo Converged HX Series Installation And Service Manual page 42

Table of Contents

Advertisement

When the prompt <F1> Setup is displayed, press F1. If you have set an administrator password,
Step 2.
you must type the administrator password to access the full Setup utility menu. If you do not type
the administrator password, a limited Setup utility menu is available.
Step 3.
Select settings to view or change.
Setup utility menu choices
Use the Setup utility main menu to view and configure server configuration data and settings.
The following choices are on the Setup utility main menu for the UEFI. Depending on the version of the
firmware, some menu choices might differ slightly from these descriptions.
• Main
This page shows you the system information, include UEFI firmware version, build time and the system
Date / Time were being set. This page also includes 2 sub-mainus below:
– Processors
Select this choice to view or change the processor settings.
– Memory
Select this choice to view or change the memory settings.
• Advanced
– AST2400 Super IO Configuration
Select this to enter Super IO next configuration page.
– Upper IO chip
Enter this page you can view the Super IO Chipest information.
– Serial Port 1 Configuration
Enter this page you can Enable/Disable Serial Port of this Super IO.
– Serial Port Console Redirection
Select this to enter the Super IO Console Redirection sub configuration page or view Windows
Emergency Management Service ( EMS ) Console Redirection setting.
– Console Redirection Settings
Select this to view the overall settings.
– Legacy Console Redirection Setting
– Console Redirection Settings
– PCI Subsystem Settings
Select this to view or change the PCI Devices common settings.
– Network Stack Configuration
Select this to view or change Network Stace IPV4 and IPV6 PXE Support settings.
– CSM Configuration
Select this to view or change CSM Support and Netwrok, Storage, Video, Other PCI devices legacy
support.
– Infor Report Configuration
Select this to view or change POST Report and Summary Screen settings.
– iSCSI Configuration
Select this to Add, Delete or Change an iSCSI Initiator Name or Attempt.
28
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide

Advertisement

Table of Contents
loading

Table of Contents