Lenovo Converged HX Series Installation And Service Manual page 44

– PCH SATA Configuration
Select this to view or change PCH SATA device configuration.
– USB Configuration
Select this to view or change USB settings.
• Server Mgmt
Select this to view or change the settings of how system is managed by UEFI and TMM server
management functions.
– System Event Log
Select this to handle how the logs in SEL to be managed.
– TMM network Configuration
Select this choice to view the system management network interface port, the MAC address.
– View Sysetm Event Log
Select this choice to enter the System Event viewer to view the log messages details.
– DNS Configuration
Select this to Enable/Disable DNS Service, change DNS DHCP mode and DNS Server IP address
• Security
There are 2 levels of passwords can be applied for the system: Administrator Passwrod and and User
Password. ONLY if the Administrator's password is set, then this only limits access to Setup and is only
asked for when entering Setup. ONLY if the User's password is set, then this is a power on password and
must enterred to boot or enter Setup. In Setup the User will have Administrator rights. The password
legnth must be within the Minum length 3 to Maximum length 20.
• Boot
Select this to view the settings or change the Boot behavior during system boot time.
• Save & Exit
Select this choice to exit from the Setup utility. If you have not saved the changes that you have made.
Passwords
From the User Security menu choice, you can set, change, and delete a power-on password and an
administrator password.
The User Security menu choice is on the full Setup utility menu only.
If you set only a power-on password, you must type the power-on password to complete the system startup
and to have access to the full Setup utility menu.
An administrator password is intended to be used by a system administrator; it limits access to the full Setup
utility menu. If you set only an administrator password, you do not have to type a password to complete the
system startup, but you must type the administrator password to access the Setup utility menu.
If you set a power-on password for a user and an administrator password for a system administrator, you
must type the power-on password to complete the system startup. A system administrator who types the
administrator password has access to the full Setup utility menu; the system administrator can give the user
authority to set, change, and delete the power-on password. A user who types the power-on password has
access to only the limited Setup utility menu; the user can set, change, and delete the power-on password, if
the system administrator has given the user that authority.
30
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide