Lenovo Converged HX Series Installation And Service Manual page 182

Description:
Upper Critical - Going High - Asserted
Message:
CPU% VCORE voltage is too high
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. If the error remains, contact Lenovo service representative for execution of processor replacement.
3. If the error recurs, contact Lenovo service representative for execution of node replacement.
• Diagnostic Code:
02010713
02010714
Full Sensor Name (Sensor Name In SDR):
CPU%_VCORE (% = CPU number)
Sensor Type:
Voltage
Event Severity:
Warning
Description:
Upper Non-Critical - Going High - Asserted
Message:
CPU% VCORE voltage is too high
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. If the error remains, contact Lenovo service representative for execution of processor replacement.
3. If the error recurs, contact Lenovo service representative for execution of node replacement.
• Diagnostic Code:
01010B20
Full Sensor Name (Sensor Name In SDR):
Inlet_Temp
Sensor Type:
Temperature
Event Severity:
Critical
Description:
Upper Non-Recoverable - Going High - Asserted
Message:
Inlet temperature is too high
Actions:
168
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide