Power-Supply-Unit Air Baffle Replacement - Lenovo ThinkSystem SR630 V3 User Manual

Step 3. Install the PCIe adapter and secure it to the riser assembly.
Figure 107. PCIe adapter installation into the LP-FH riser assembly
a. Align the PCIe adapter with the PCIe slot on the riser card. Then, carefully press the PCIe
adapter straight into the slot until it is securely seated and its bracket is secured.
b. Rotate the latch on the riser bracket to closed position.
Notes:
1. Ensure that PCIe adapter installation meets the rules in
2. The procedure for installing a PCIe adapter is similar for different types of riser assembly. In
this topic, the LP-FH riser assembly is used as an example.
Step 4. Connect cables to the PCIe adapter in the riser assembly. See
page 249.
After you finish
1. Reinstall the riser assembly. See
2. Complete the parts replacement. See
Demo video
Watch the procedure on YouTube

Power-supply-unit air baffle replacement

Use this information to remove and install a power-supply-unit air baffle.
ThinkSystem SR630 V3 User Guide
172
"Install a riser card" on page
"Complete the parts replacement" on page
"PCIe slots and adapters" on page
Chapter 6 "Internal cable routing" on
211.
246.
61.