Figure 321. Cable routing for 8 x 2.5-inch front SAS/SATA drive bays with a 16i CFF RAID adapter (Gen 3 or Gen 4) with 2
x 2.5 SAS/SATA drives installed
Table 128. Mapping between one front and one rear SAS/SATA backplane and a CFF RAID adapter
Backplane/adapter
Front BP (SAS)
CFF RAID adapter
8 x 2.5'' U.3 drives with 10 x 2.5 AnyBay backplane
Use this section to understand the cable routing for eight U.3 drives with 10 x 2.5 Anybay backplane and two
processors installed.
From
SAS 0
1
SAS 1
2
C3
3
MB input
4
To
C0
1
C1
2
SAS (rear)
3
PCIe 3
4
.
Chapter 6
Internal cable routing
381