Lenovo ThinkSystem SR630 V3 User Manual page 106

Step 3. Locate the CMOS battery. See
Step 4. Open the battery clip as shown and carefully take the CMOS battery out of the socket.
Attention:
• Failing to remove the CMOS battery properly might damage the socket on the processor board.
Any damage to the socket might require replacing the processor board.
• Do not tilt or push the CMOS battery by using excessive force.
Figure 46. The positive and negative end on the CMOS battery socket
Note: Before you remove or install the CMOS battery from or into the socket, differentiate between
the positive and negative ends. Use the illustration above for guidance.
Figure 47. CMOS battery removal
1. Pry the CMOS battery from the socket with a flat-blade screwdriver.
2. Remove the CMOS battery.
After you finish
1. Install a new CMOS battery. See
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
3. Dispose of the CMOS battery as required by local ordinances or regulations.
Demo video
Watch the procedure on YouTube
ThinkSystem SR630 V3 User Guide
96
"System-board-assembly connectors" on page
"Install the CMOS battery" on page
36.
97.