Lenovo ThinkSystem SR630 V3 User Manual page 203

Step 3. If the server does not have a RAID flash power module holder on the chassis, install one first.
Figure 129. RAID flash power module holder installation
Put the holder down, and move it to the direction as shown to lock the holder onto the chassis.
Step 4. Install the RAID flash power module on the chassis.
Figure 130. Installation of the RAID flash power module on the chassis
a. Open the retention clip on the holder.
b. Put the RAID flash power module into the holder and press it down to secure it into the
holder.
After you finish
1. Connect the super capacitor module to an adapter with the extension cable that comes with the flash
power module. See "RAID flash power modules" on page 264.
.
Chapter 5 Hardware replacement procedures
193