To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to
backplane power" on page
To connect cables for M.2 drives, refer to
To connect signal cables for a backplane for standard 6 front SAS/SATA drives and 4 front AnyBay drives,
refer to the following cable routing scenarios depending on your server configuration:
•
"Cable routing for onboard configuration" on page 342
•
"Cable routing with an SFF HBA/RAID adapter" on page 343
•
"Cable routing with a CFF RAID adapter" on page 347
Cable routing for onboard configuration
The following illustrations and tables show the mapping relationship between backplane connectors and
processor board connectors for onboard configuration.
The following figure illustrates the cable routing for the configuration of 10 front SAS/SATA drives bays.
Connections between connectors:
ThinkSystem SR630 V3 User Guide
342
274.
"M.2 drive backplane" on page
↔
↔
,
,
1
1
2
2
3
267.
↔
↔
, ...
.
3
n
n
"Cable routing for