Table 15. Components on the rear of the server (continued)
Callout
USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs)
7
Ethernet connectors on OCP module (optional, two or
9
four connectors may be available)
Figure 4. Rear view with one low profile PCIe adapter, one filler, and one full height PCIe adapter
Table 16. Components on the rear of the server
Callout
PCIe slot 1 on riser 1 assembly
1
Power supply 2 (optional)
3
NMI button
5
USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs)
7
Ethernet connectors on OCP module (optional, two or
9
four connectors may be available)
Note: For more information about each component, see
Server model with two 2.5-inch hot-swap rear drive bays and one PCIe slot
The following illustration shows the rear view of the server model with two hot-swap drive bays and one PCIe
slot. Depending on the model, your server might look slightly different from the illustration below.
Table 17. Components on the rear of the server
PCIe slot 1 on riser 1 assembly
1
Power supply 2 (optional)
3
NMI button
5
USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs)
7
Ethernet connectors on OCP module (optional, two or
9
four connectors may be available)
Note: For more information about each component, see
ThinkSystem SR630 V3 User Guide
28
Callout
XClarity Controller network connector
8
Callout
PCIe slot 3 on riser 2 assembly
2
Power supply 1
4
VGA connector
6
XClarity Controller network connector
8
"Rear components overview" on page
Rear 2.5-inch drive bays (2)
2
Power supply 1
4
VGA connector
6
XClarity Controller network connector
8
"Rear components overview" on page
30.
30.