Lenovo ThinkSystem SR630 V3 User Manual page 185

A video of this procedure is available on YouTube:
CfNsWy-689CRZHExrZEi9I
Procedure
Step 1. Remove the top cover. See
Step 2. Install the power-supply-unit air baffle.
Figure 109. Power-supply-unit air baffle installation
a. Align the screw holes on the air baffle and the chassis, and put the air baffle down.
b. Tighten the screw and ensure that the air baffle is secured in place.
After you finish
• Properly route and secure the cables in the server. Refer to detailed cable routing information for each
component in Chapter 6 "Internal cable routing" on page
• Complete the parts replacement. See
.
"Remove the top cover" on page
"Complete the parts replacement" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
243.
249.
.
Chapter 5 Hardware replacement procedures
246.
175