Lenovo ThinkSystem SR630 V3 User Manual page 429

Figure 354. Cable routing for six front SAS/SATA and four front AnyBay drives with a 16i CFF HBA/RAID adapter (Gen 4)
and two rear SAS/SATA drives installed
Table 161. Mapping between one front AnyBay and one rear SAS/SATA backplane and a CFF HBA/RAID adapter
Backplane/adapter
Front BP (SAS)
CFF RAID adapter
Front BP (power)
Front BP (NVMe)
6 x 2.5'' SAS/SATA + 2 x 2.5'' AnyBay + 2 x 2.5'' NVMe (Gen 5)
See this section to understand the cable routing of six front SAS/SATA drives, two front AnyBay drives and
two front NVMe drives with the 10 x 2.5'' AnyBay backplane (Gen 5) installed.
To connect cables for a 7mm drive backplane, refer to
To connect cables for M.2 drives, refer to
From
SAS 0–3
1
SAS 4–7
2
SAS 8–9
3
MB input
4
C3
5
Power and sideband
6
NVMe 6–7
7
NVMe 8–9
8
"7mm drive backplane" on page
"M.2 drive backplane" on page
To
C0
1
C1
2
C2
3
PCIe 3
4
SAS (rear)
5
Power port for front BP
6
PCIe 2
7
PCIe 1
8
270.
267.
.
Chapter 6 Internal cable routing
419