Lenovo ThinkSystem SR630 V3 User Manual page 111

• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Procedure
Step 1. Touch the static-protective package that contains the EDSFF cage to any unpainted surface on the
outside of the server. And then, take the EDSFF cage out of the package and place it on a static-
protective surface.
Step 2. Slide the diagnostics panel assembly into the front chassis as shown. And ensure that it is seated in
place.
Figure 50. EDSFF cage installation
.
Chapter 5 Hardware replacement procedures
101