Cable routing with an SFF HBA/RAID adapter
The following table shows the mapping relationship between backplane connectors and processor board/
adapter connectors when an 8i SFF HBA/RAID adapter (Gen 3 or Gen 4) is installed.
The following figure illustrates the cable routing for the configuration of 4 x 2.5-inch front AnyBay drive bays
with an 8i SFF RAID adapter. Connections between connectors:
Figure 309. Cable routing for 4 x 2.5-inch front AnyBay drive bays with an 8i SFF RAID adapter
Table 116. Mapping between backplane and processor board/adapter when an SFF HBA/RAID adapter is installed
Backplanes
Front BP (SAS)
Notes:
ThinkSystem SR630 V3 User Guide
368
From
SAS
↔
↔
↔
,
,
, ...
1
1
2
2
3
3
To
C0
↔
n
n