Lenovo ThinkSystem SR630 V3 User Manual page 234

• Read "Installation Guidelines" on page 51
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
• After replacing the Firmware and RoT Security Module, update the firmware to the specific version
supported by the server. Make sure that you have the required firmware or a copy of the pre-existing
firmware before you proceed.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/products/servers/thinksystem/sr630v3/7d72/downloads/driver-
to see the latest firmware and driver updates for your server.
list/
• Go to "Update the firmware" on page 433
Step 1. Prepare your server.
a. Perform OneCLI commands to back up the UEFI settings. See
help/topic/toolsctr_cli_lenovo/onecli_r_save_command.html
b. Perform both OneCLI commands and XCC actions to back up the XCC settings. See
sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_r_save_command.html
sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc2.doc/NN1ia_c_
backupthexcc.html
c. Remove the top cover. See
d. If your server comes with a rear drive assembly, remove it first. See
drive assembly" on page
e. If your server comes with a 7mm rear drive assembly, remove it first. See
rear drive assembly" on page
f. If your server comes with riser assemblies, remove them first, see
204.
ThinkSystem SR630 V3 User Guide
224
and "Safety inspection checklist" on page 52
68.
for more information on firmware updating tools.
.
"Remove the top cover" on page
198.
202.
to ensure that you
https://sysmgt.lenovofiles.com/
.
243.
"Remove the 2.5-inch rear
"Remove the 7mm
"Riser assemblies" on page
https://
and https://