Lenovo ThinkSystem SR630 V3 User Manual page 402

6 x 2.5'' SAS/SATA + 2 x 2.5'' AnyBay + 2 x 2.5'' NVMe
See this section to understand the cable routing of 6 front SAS/SATA drives, 2 front AnyBay drives and 2
front NVMe drives.
To connect cables for a 7mm drive backplane, refer to
To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to
backplane power" on page
To connect cables for M.2 drives, refer to
To connect signal cables for a backplane for standard 6 front SAS/SATA drives, 2 AnyBay drives and 2 front
NVMe drives, refer to the following cable routing scenarios depending on your server configuration:
• "Cable routing for onboard configuration" on page 392
• "Cable routing with an SFF HBA/RAID adapter" on page 393
• "Cable routing with a CFF RAID adapter" on page 395
Cable routing for onboard configuration
The following tables show the mapping relationship between backplane connectors and processor board
connectors for onboard configuration.
ThinkSystem SR630 V3 User Guide
392
274.
"M.2 drive backplane" on page
"7mm drive backplane" on page
267.
270.
"Cable routing for