• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
CAUTION:
Make sure to have three people operate the server removal procedures to prevent injury.
Procedure
Step 1.
Loosen the two
Rack front
Figure 21. Disengaging server from the rack
Step 2.
Hold the
mounting ears on the front of the server; then, slide the server all the way out until it
1
stops.
ThinkSystem SR630 V3 User Guide
70
68.
thumbscrews located on the
2
rack latches to disengage it from the rack.
1