Lenovo ThinkSystem SR630 V3 User Manual page 365

• Gen 3 and Gen 4 SFF HBA/RAID adapters are slightly different in their connectors, but the cable routing
method is similar.
• To connect cables for RAID flash power module, refer to
Figure 305. Cable routing for 4 x 3.5-inch front SAS/SATA drive bays with an 8i SFF RAID adapter and rear 2 x 2.5–inch
NVMe drives
Table 105. Mapping between backplane connectors and processor board/adapter connectors when an SFF HBA/RAID
adapter is installed
Backplane
Front BP (SAS)
1
Rear BP (NVMe)
2
"RAID flash power modules" on page
From
SAS
NVMe 0, NVMe 1
264.
To
C0
PCIe 6
.
Chapter 6 Internal cable routing
355