Lenovo ThinkSystem SR630 V3 User Manual page 323

Cable routing with an SFF HBA/RAID adapter
The following table shows the mapping relationship between backplane connectors and processor board/
adapter connectors when an 8i SFF HBA/RAID adapter (Gen 3 or Gen 4) is installed.
The following figure illustrates the cable routing for the configuration of 4 x 2.5-inch front AnyBay drive bays
with an 8i SFF RAID adapter. Connections between connectors:
Figure 269. Cable routing for 4 x 2.5-inch front AnyBay drive bays with an 8i SFF RAID adapter
Table 69. Mapping between backplane connectors and processor board/adapter connectors when an SFF HBA/RAID
adapter is installed
Backplanes
Front BP (SAS)
Notes:
From
SAS
↔ ↔ ↔
, , , ...
1 1 2 2 3 3
To
C0
.
Chapter 6 Internal cable routing
↔
n n
313