Lenovo ThinkSystem SR630 V3 User Manual page 248

2. Properly route and secure the cables in the server. Refer to detailed cable routing information for each
component in Chapter 6 "Internal cable routing" on page
3. Install the rear drive cage if you have removed it. See
199.
4. Install the air baffle if you have removed it. See
5. Install the top cover. See
6. Push the power supplies into the bays until they click into place.
7. Connect power cords to the server and turn on the server.
8. Update the Vital Product Data (VPD) of the system board assembly. See
(VPD)" on page 238.
9. Optionally, enable Secure Boot. See
Demo video
Watch the procedure on YouTube
Update the Vital Product Data (VPD)
Use this topic to update the Vital Product Data (VPD).
• (Required) Machine type
• (Required) Serial number
• (Optional) Asset tag
• (Optional) UUID
Recommended tools:
• Lenovo XClarity Provisioning Manager
• Lenovo XClarity Essentials OneCLI commands
Using Lenovo XClarity Provisioning Manager
Steps:
1. Start the server and press the key according to the on-screen instructions. The Lenovo XClarity
Provisioning Manager interface is displayed by default.
2. Choose System Summary. The "System Summary" tab page is displayed.
3. Click Update VPD, then, follow on-screen instructions to update the VPD.
Using Lenovo XClarity Essentials OneCLI commands
• Updating machine type
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]
• Updating serial number
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> [access_method]
• Updating system model
onecli config set SYSTEM_PROD_DATA.SysInfoProdIdentifier <system model> [access_method]
onecli config set SYSTEM_PROD_DATA.SysInfoProdIdentifierEx <system model> --override [access_method]
• Updating asset tag
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> [access_method]
• Updating UUID
onecli config createuuid SYSTEM_PROD_DATA.SysInfoUUID [access_method]
ThinkSystem SR630 V3 User Guide
238
"Install the air baffle" on page
"Install the top cover" on page
"Enable UEFI Secure Boot" on page
249.
"Install the 2.5-inch rear drive assembly" on page
244.
"Update the Vital Product Data
228.
78.