Lenovo ThinkSystem SR630 V3 User Manual page 286

• The two pump cables and one cable for the leakage detection sensor module are integrated to the LACM,
make sure that all three cables are connected.
Note: For better cable arrangement, it is required to install the liquid detection sensor module to a
designated holder, and make sure that the module is secured in holder clips. Use the illustration below or
"Install the Lenovo Neptune(TM) liquid assisted cooling module" on page 143
Liquid assisted cooling module cable routing
Cable
Pump 1
1
Pump 2
2
Leak detection
3
With the LACM installed, your server supports below drive combinations:
ThinkSystem SR630 V3 User Guide
276
From
Pump 1 cable
Pump 2 cable
Leak detection cable
for details.
To
Pump 1 connector
Pump 2 connector
Leak detection connector