Setting Up The Connection - AGFA Drystar 5500 Reference Manual

D 5500/5503 R
RYSTAR

Setting up the connection

Setting up a direct link (configuration with crossed network
cable)
To set up a direct link, you have to follow two procedures:
•
Attribute a fixed IP address to the PC,
•
Switch off all proxy setting in the browser.
When setting up a link, bare in mind the following important hints:
• Always make the physical connection first,
• Depending on the PC and/or Operating System, a reboot may be necessary
in order to make the new configuration work.
Attributing a fixed IP address to the PC
Go to Settings via the Start menu of Windows and click Control Panel.
1
The Control Panel menu will appear.
168
Controlling the Drystar 5500 via a remote PC (with browser)
EFERENCE MANUAL
2900H EN 20071108