Changing Parameter Settings Using Simatic Pdm; Parameters Accessed Via Pull-Down Menus - Siemens SITRANS L Operating Instructions Manual

6.3.5

Changing parameter settings using SIMATIC PDM

6.3.5.1 Changing parameter settings using SIMATIC PDM
Note
• For a complete list of parameters, see Parameter Reference (Page 90).
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via pull-down menus in PDM. See Parameters accessed via
pull-down menus (Page 65) for others.
1. Launch SIMATIC PDM, connect to device, and upload data from device.
2. Adjust parameter values in the parameter value field then Enter. The status fields read
Changed.
3. Open the Device menu, click on Download to device, then use File - Save to save settings
offline. The status fields are cleared.
①
6.3.6

Parameters accessed via pull-down menus

Click on Device or View to open the associated pull-down menus.
①
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF
Value fields
Pull-down menus
Operating
6.3 Remote operation
65