Changing parameter settings using SIMATIC PDM
Notes:
• For a complete list of parameters, see
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
1.
Launch SIMATIC PDM, connect to SITRANS LR260, and upload data from the device.
2.
Adjust parameter values in the parameter value field then press Enter. The status
fields read Changed.
3.
Open the Device menu, click on Download to Device, then use File – Save, to save
parameter settings. The status fields are cleared.
Parameters accessed via pull-down menus
You have access to a number of functions via pull-down menus from the menu bar. under
Device or View.
For a complete list, see
Page 44
SITRANS LR260 (PROFIBUS PA) – OPERATING INSTRUCTIONS
value
fields
Pull-down menus via SIMATIC PDM
pull-
down
menus
Parameter Reference
on page 53.
on page 53.
A5E32337685