Changing Parameter Settings Using Simatic Pdm - Siemens SITRANS LR250 Operating Instructions Manual

Remote operation
7.1 Operating via SIMATIC PDM
7.1.5

Changing parameter settings using SIMATIC PDM

Note
• For a complete list of parameters, see Parameter Reference (Page 121).
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via pull-down menus in PDM. See Parameters accessed via
pull-down menus (Page 83) for others.
1. Launch SIMATIC PDM, connect to device, and upload data from device.
2. Adjust parameter values in the parameter value field then Enter. The status fields read
Changed.
3. Open the Device menu, click on Download to device, then use File - Save to save settings
offline. The status fields are cleared.
①
82
Value fields
SITRANS LR250 (mA/HART)
Operating Instructions, 12/2015, A5E32220602-AD