Fcc Conformity; Industry Canada Conformity - Siemens SITRANS L Operating Instructions Manual

2.2.1

FCC Conformity

US Installations only: Federal Communications Commission (FCC) rules
Note
• This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
• This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the operating instructions, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference to radio communications, in which case the user will
be required to correct the interference at his own expense.
2.2.2

Industry Canada conformity

Canada Installations only: Industry Canada (IC) rules
NOTICE
Use on a "no-interference, no-protection" basis
The installation of the LPR/TLPR device shall be done by trained installers, in strict
compliance with the manufacturer's instructions.
• The use of this device is on a "no-interference, no-protection" basis. That is, the user shall
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF
accept operations of high-powered radar in the same frequency band which may
interfere with or damage this device. However, devices found to interfere with primary
licensing operations will be required to be removed at the user's expense.
Safety notes
2.2 Laws and directives
15