Changing Parameter Settings Using Simatic Pdm - Siemens SITRANS LR560 Operating Instructions Manual

7.1.1.6

Changing parameter settings using SIMATIC PDM

Changing parameter settings using SIMATIC PDM
Note
• For a complete list of parameters, see Parameter Reference (Page 87).
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via pull-down menus in PDM. See Parameters accessed via
pull-down menus (Page 69) for others.
1. Launch SIMATIC PDM, connect to device, and upload data from device.
2. Adjust parameter values in the parameter value field then Enter. The status fields read
Changed.
3. Open the Device menu, click on Download to device, then use File - Save to save
settings offline. The status fields are cleared.
Parameters accessed via pull-down menus
Click on Device or View to open the associated pull-down menus.
Pull-down menus
Device menus
Communication path
Download to device
Upload to PC/PG
Update Diagnostic Status
Set address
Quick Start wizard via SIMATIC PDM (Page 63)
Echo profile utilities (Page 70)
Maintenance (Page 74)
Acknowledge faults (Page 75)
Wear (Page 76)
Simulation (Page 76)
Write Locking (Page 79)
Master Reset (Page 80)
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE
7.1 Remote operation
View menus
Process variables (Page 81)
Diagnostics (Page 83)
Toolbar
Status bar
Update
Operating
69