Ce And Ukca Electromagnetic Compatibility (Emc) Conformity; Radio Equipment Compliance (Europe And Uk) - Siemens SITRANS L Operating Instructions Manual

Safety notes
2.2 Laws and directives
2.2.3

CE and UKCA Electromagnetic Compatibility (EMC) Conformity

This equipment has been tested and found to comply with the following EMC Standards:
EMC Standard
CISPR 11:2009 + A1:2010/EN
55011:2009 + A1:2010, Class B
EN 61326:2013
(IEC 61326:2012)
EN61000-4-2:2009
EN61000-4-3:2006 + A1:2008 + A2:2010
EN61000-4-4:2004 + A1:2010
EN61000-4-5:2006
EN61000-4-6:2010
EN61000-4-8:2010
2.2.4

Radio Equipment compliance (Europe and UK)

Hereby, Siemens declares that the SITRANS LR200 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and
Regulation SI 2017/1206. The LR200 complies with EN 302 372 for use in closed storage
vessels, when installed according to the installation requirements of EN 302 372, and may be
used in all EU countries and the UK.
For the receiver test that covers the influence of an interferer signal to the device, the
performance criterion has at least the following level of performance according to ETSI TS
103 361 [6]:
• Performance criterion: measurement value variation Δd over time during a distance
measurement
• Level of performance: Δd ≤ ±50 mm
16
Title
Limits and methods of measurements of radio dis-
turbance characteristics of industrial, scientific, and
medical (ISM) radio-frequency equipment.
Electrical Equipment for Measurement, Control and
Laboratory Use – Electromagnetic Compatibility.
Electromagnetic Compatibility (EMC) Part 4-2: Testing
and measurement techniques – Electrostatic dis-
charge immunity test.
Electromagnetic Compatibility (EMC) Part 4-3: Testing
and measurement techniques – Radiated, radio-
frequency, electromagnetic field immunity test 2006
+ A1:2008 + A2:2010.
Electromagnetic Compatibility (EMC) Part 4-4: Testing
and measurement techniques – Electrical fast transi-
ent/burst immunity test.
Electromagnetic Compatibility (EMC) Part 4-5: Testing
and measurement techniques – Surge immunity test.
Electromagnetic Compatibility (EMC) Part 4-6: Testing
and measurement techniques – Immunity to conduct-
ed disturbances, induced by radio-frequency fields.
Electromagnetic Compatibility (EMC) Part 4-8: Testing
and measurement techniques – Power frequency
magnetic field immunity test.
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF