6.3.6.10
Maintenance
You can set schedules and reminders for:
• device maintenance based on its projected lifetime
• sensor maintenance based on its projected lifetime
• service
• calibration
To set Device/Sensor Maintenance schedules:
1. Open the menu Device – Maintenance, and click on the Remaining Device/Sensor
Lifetime tab.
2. Modify desired values, and if desired, set reminders for either or both of Reminder 1 before
Lifetime (Required)/Reminder 2 before Lifetime (Demanded).
3. Click Write.
4. Click Read, to see the effects of your modification.
5. Click Snooze to add a year to the Total Expected Device Life.
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF
Operating
6.3 Remote operation
73