Changing Parameter Settings Using Simatic Pdm - Siemens SITRANS LR560 Operating Instructions Manual

Step 4 – Summary
Check parameter settings, and click on BACK to return and revise values, FINISH to save
settings offline, or FINISH AND DOWNLOAD to save settings offline and transfer them to
the device.
The message Quick Start was successful will appear. Click on OK.

Changing parameter settings using SIMATIC PDM

Notes:
• For a complete list of parameters, see
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via the 4-level menu in PDM. See
pull-down menus
1) Launch SIMATIC PDM, connect to SITRANS LR560, and upload data from the
device.
2) Adjust parameter values in the parameter value field and then press Enter. The
status fields read Changed.
A5E34647946
below for the others.
SITRANS LR560 (mA/HART) – OPERATING INSTRUCTIONS
Parameter Reference
Parameters accessed via
on page 83.
Page 47